-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
ur1 power steering
- Thread starter thomas
- Start date
- Joined
- May 27, 2007
- Messages
- 53
- Location
- Suffolk, England
- First name
- brian
Machinery:
Zetor 6718
JCB 3D II
Ram?
Beware there are two different PS setups on 7 series, the original Czech one and an italian setup.
The Czech system has the pressure relief valve built into the cast iron pump and the italian setup has an alloy pump with no relief valve and a relief valve hanging off the side (or top) of the ram.
all the plumbing is completely different so best to stick with the same type as on there now
i have just converted my 6745 from the italian pump (broke it) to the more common Czech pump.......... now have 2 relief valves ...... and a new set of hoses as all the fittings are different.
DO NOT try to use a Czech Ram on the itialian pump!!!
The Czech system has the pressure relief valve built into the cast iron pump and the italian setup has an alloy pump with no relief valve and a relief valve hanging off the side (or top) of the ram.
all the plumbing is completely different so best to stick with the same type as on there now
i have just converted my 6745 from the italian pump (broke it) to the more common Czech pump.......... now have 2 relief valves ...... and a new set of hoses as all the fittings are different.
DO NOT try to use a Czech Ram on the itialian pump!!!
- Joined
- Dec 8, 2006
- Messages
- 628
- First name
- Dave P
Calzoni systems were also fitted to some 6945's as well
Similar threads
