zetor 5245

[per_ola]

i would like to give my 5245 a little more fuel .do you know how to do it? i have taken off the plate in back on the pump(regulator)
i can see tree screws for flat screwdriver(with nut)
witch of them shall i turn,and how mutch?

what will happend if i put turbo blower on this engine? Must i change the pistons?


For 15 yers ago it was sold some of this tractors whit turbo,named zetor 6545.

 

[ixer0]

Hi, the screw you need to turn is the top one. Screw it clockwise (inwards) a maximum of one third of a turn. Any more and you will get smoke but no more power. Regards Mike

 

[per_ola]

I screw it up 2 turns yesterday> now he runs like hell>>

 

[sih]

Do you think the same would apply for my 5711? -Mines smoking masses of black smoke,and the guy that had it before me fiddled with everything to get it going?

 

[zetor3545]

most probobaly just screw it down till the smoke stops. but also make sure you feel as if you have enough power. you want a little smoke

 

[Renze]

Do you think the same would apply for my 5711? -Mines smoking masses of black smoke,and the guy that had it before me fiddled with everything to get it going?

Masses of black smoke is usually a bad timing, or worn out fuel nozzles. Applying too much starting ether usually results in molten off injector needles.