• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
  • Hello.
    In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
    No worry, its all for free!
    For more details - click here.

question Zetor 6245 - hydraulic issue

simon3862

Member
Level 2
Joined
Mar 15, 2024
Messages
3
Location
Stratford, Victoria, Australia
First name
Simon

Machinery:
Zetor 6245
Hi there,

Simon from Llowalong, Victoria, Australia here.

My trusty Zetor has developed an issue with the FEL hydraulics. It still lifts with the same power but incredibly slowly.

Any suggestions would be greatly appreciated.

IMG_2339.jpeg IMG_2338.jpeg
 
Have you possibly adjusted the reaction speed lever?
The short one at the front of the hydraulic console, which you can swing left and right.
If it moves very easily, the rod under the cabin may have fallen off, then take a look there too.

See also handbook hydraulic instructions section - its explained there.
 
Thanks for such a quick reply, Joachim. I have been away on holidays and have now had a chance to see if the level was the issue. Unfortunately not....the lever works fine and the rod is still connected. I am wondering if there is a pump failure but not 100% sure where it is located.

Regards,

Simon
 
The hydraulic pump on your Zetor model is located at the rear under or below the differential. From the outside you will find a circular cover at the bottom, onto which the pump is screwed inside.
 

Users who are viewing this thread

Back
Top