zetor 8011 fuel pump

[jackreacher]

No fuel coming out of the injectors on the fuel pump, but loads coming out of the bleed off screw.

I figure it is the rack so i want to take the pump off. Its a motorpal 225/110d-250m fuel pump.

Do I just undo the 3 nuts and it only comes off and goes in one way or is it more complicated?

Can someone check in a manual os something.

Many thanks Jack

 

[diyfarmer]

As you say all you have to do is undo the 3 nuts and lever off the pump, open the pipes and the throttle shaft. Only before you do anything make sure you have a good line mark on the pump and housing so to get the timing correct when refitting.

 

[jackreacher]

Thanks DIY.. I'll have a go tomorrow.