Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
Does anyone out there have a operator manual for a zetor 8111,a photocopy would do me fine,or would a copy of a 8011 manual do me?My email is zetor12045@eircom.net
Not really just intrested in having a copy of it for reference more than anything else and a bit of nostalga,had to do a bit of welding on her the other day,the sliding part with the ball.broke the bottom of the rectangular section that it slides into,i decided then to just weld the whole thing in place as id say i never had a need to slide it out!
...the sliding part with the ball.broke the bottom of the rectangular section that it slides into,i decided then to just weld the whole thing in place as id say i never had a need to slide it out!
I have found them handy very rarely. I find that the Zetor system tends to require constant oiling otherwise they seize up. This might be due to our muddy conditions and wet climate.
The JD ones without hooks dont fare much better, but are usable if you have no oil.
Hooks and balls are nice, but I once had one pop out. Maybe I didnt get it in properly, but I was reversing with a mower on.... Damn rubber is expensive! Probably me being too tired to be driving to be honest!