Search results for query: *

I can tell you Tom it rattles more than your teeth.I can really only open it up on main roads and very smooth secondary roads even then you have to be vigilant for any bump or rough tar patch. it really could rattle the bejaysus out of ya alright. And there is quiet a kick back when you pull...

Just wondering when did Zetor update the crystal to a 40 k box. I am driving a 1992 8111. It does 40 kmh with a 12 foot trailer load of heavy clay. Measured it with a garmin sat nav. Speedometer out of order since I bought it. Was it only the late models in the early 90's that had it?

I am pretty sure I have all bolts removed. There are two bolts at the top of the spindle and 4 bolts at the heel where it connects to the steering rod assembly. There are three bolt holes on the inside of the heel which are just plugged with rubber dust caps. I was just wondering is there ball...

Decided to save a few quid and take on this Job myself. Just wondering what is the best practice has anyone here carried out this task before?. The tractor is a crystal. The reason the stub axle has to be changed is due to a previous owner welding the Nut. I currently have all bolts removed and...

I currently have the fuel tank removed on my 8111 it was full of dirt. Just wondering what is the best way to clean it I am currently just flushing it with water. Also the return line goes into the Tank outlet beside the outlet for the sediment bowl am I right?? I have my fingers crossed that...

Thanks dave thats a good help there I never went near the 12mm bolt on the fuel pump. I have an 8011 and an MF 165 that never as far as I can recall got airlocked. I usually never let a tank get more than half empty. I think the Hydraulics on this tractor are airlocked as well. They are very...

Hi there. I got airlocked on an 8111 despite the fuel gauge reading a half full tank. Visual inspection of the tank didnt tell me much as depth perception is difficult in a top down view. In my opinion the gauge is really only a toy as it oscillates wildly with the fuel sloshing around in the...

I only ever saw two models with with the S and they definitely were the older type Tin Work. The one I mentioned above there was in the older Red and grey paint scheme so it was well before the era of the sloping bonnets.

Hi there I'm new to the site. I own a 1979 8011 myself which runs like a clock. I was just enquiring about the 8011 S a local contractor used to have one which he used to run with a a rusty old green claas rotary drum mower in his Silage contracting business and I visually inspected it a few...