Will it hurt or break anything to run a bushhog behind this tractor without the stabilizer bars pinned..Have to pull a pin to get the arms to spread enough to go on the implement then holes in the stabilizer bars do not line up -- You can swing the bushhog a little and get one pin in but it makes the hog run crooked behind the tractor..Never seen anything like it..Both stabilizer bars have to be left un-pinned for the bushhog to run straight behind the tractor. Pin the right side and it runs to the right and the left one will not pin at all. Thanks for any thoughts.
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
5211 implement-cannot connect stabilizer bars
- Thread starter tom_n_ms
- Start date
Similar threads
