My clutch pedal is nearly at the floor and crunching going into gear. it was fine until slave cylinder bolt came out and piston came out put it all back together and bled it now the clutch is doing this any ideas please.
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
7245 clutch issue
- Thread starter jammy100
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,007
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
The clutch and brake use the same fluid from the same reservoir.
Because the suction port of the clutch is higher than the suction port of the brakes, you'll loose the clutch before you loose brakes.
You're simply out of brake fluid.
Because the suction port of the clutch is higher than the suction port of the brakes, you'll loose the clutch before you loose brakes.
You're simply out of brake fluid.
Hi,
Have you tried bleeding it again ?
Mike
Have you tried bleeding it again ?
Mike
- Joined
- Jul 5, 2003
- Messages
- 4,007
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
probably a scratch on the slave piston.
Take off the dust boot of the master cylinder, if its full of oil, its the cause of your problem. If not, replace the slave.
Take off the dust boot of the master cylinder, if its full of oil, its the cause of your problem. If not, replace the slave.
Similar threads
