If the tractor has to work hard or long the water is too hot and get blown out. Also, there is water in the oil of the engine. I removed the cylinder heads off but do not see an immediate problem with the head gasket. Any ideas or tips?
-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
cooling water in engine oil
- Thread starter snakeman
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,059
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
water in oil, when the head gasket is ok, means that the O rings around the piston liners are bad. But since it blows water out, start with the head gaskets first...
Oh, and change the frost plugs on the bottom of the heads: if they leak, it runs into the engine oil too without leaks on the outside.
Oh, and change the frost plugs on the bottom of the heads: if they leak, it runs into the engine oil too without leaks on the outside.
Similar threads
