Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
I own a 4341 and need to do filter changes (oil, air, fuel and hyd/trans); are there after market filters that fit (Wix, Purolater, Napa...) or do you just purchase Zetor filters?
on the 4341 engine oil filter there is a Ford truck filter that will work. When I am at the shop tomorrow I'll try to rember to write it down the number and post it. I haven't found any substitute for the hyd./transmission or power steering filters. The power steering filters aren't very expensive but the hyd. filters are over $50 each.
Daryl in Wy.
Renze the Crosland 312 is a replacement element for the washable oil filter discs used on the 3 Cylinder engines. The correct Crosland numbers for the 2 stage fuel filters are:- 667 for stage 1 & 668 for stage 2.
Hmm... I remember that when i changed the filters, Crosland 312 is what i took out of the fuel filter bowls....
The previous owner of our 5245 must have already put oil filters in the fuel filter housings... When i bought new ones, i was surprised that the numbers were different, but nobody told me that Crosland 312 were OIL filters !!
Renze the Crosland 312 is a replacement element for the washable oil filter discs used on the 3 Cylinder engines. The correct Crosland numbers for the 2 stage fuel filters are:- 667 for stage 1 & 668 for stage 2.
Yes it is doing away with the discs & will work in both stages. It looks similar to the fuel filter elements but it has larger "pores" to allow the oil to pass through.
Back in the old days when we had our first Zetor, a 5718, the local dealer changed brands to IHC and later Renault and later Deere and later MF... (yes, he sold all brands but never had parts for what he sold...)
When this dealer quit selling Zetor, the local Valmet dealer (3 km away from us) said that he had Crosland filters for our tractors... We have been buying Crosland 312 from him ever since... !!! I dont know how he could make this mistake, as a 5718 has the centrifugal oil filter, so there is no chance that oil and fuel filters could be swapped around, on a 4 cyl....
I remember last year i bought filters from the original dealer again, he gave me these 2 stage filter elements... I wondered why but didn't realise we've been using oil flters in the fuel all the time.....