question Starter Solenoid clicking and not turning the engine over - Zetor 3340

[Robertzetor3340]

Sometimes when turning the ignition-key to start the engine, I hear the Solenoid clicking and not turning the engine over.
It dose not do it all the time and has been doing it from the time since the purchase, back February 2024.
By turning the key several-time in a row (Like 3 to 10 times) it has started the engine.
The Starter-motor seems to be strong when turning the engine over.

Can I repair this Solenoid myself ?

 

[Joachim]

- Check the electrical connections between the battery and the starter (corrosion, breaks, crushing)
- Remove the starter magnet switch, clean the contacts inside (rust or contact burn-off) and if necessary smooth them out again with a file.

 

[Robertzetor3340]

Thanks, I will check those connections out.

If I needed to replace the starter, is this one the correct correct one for the 3340:

Starter For Zetor 3320 3321 3340 3341 4320 443-115-144-722; 410-42013 | eBay

Starter For John Deere Tractor 2000, 2100, 2200 w Zetor Eng; 410-42013.

www.ebay.com

Or this one:

Starter For Zetor Tractor 3320 3321 3340 3341 4321 4340 4341; SMA0001 701485503399 | eBay

Starter For Zetor Tractor 3320, 3321, 3340, 3341, 4321, 4340, 4341; SMA0001.

www.ebay.com

 

[Robertzetor3340]

I also searched for just the Solenoid
and is this one the correct one too ? (If I need to replace it):

Starter Motor Solenoid Switch for Zetor Tractor 3320 3340 4320 4340 5011 5211 | eBay

3011, 3320, 3340, 3511, 3513, 3545, 4320, 4340, 4511, 4611, 4712, 4718, 4911, 5011, 5211, 5213, 5243, 5245, 5320, 5340, 5340H, 5511, 5516, 5545, 5611, 5645, 5647, 5711, 5718, 5745, 5748, 5911, 5945, 6011, 6045, 6211, 6245, 6320, 6340, 6711, 6718, 6745, 6748, 6911, 6945, 7011, 7045, 7211, 7245...

www.ebay.com

 

[Joachim]

Thnik that shoul fit.

 

[Robertzetor3340]

UPdate: Looking at the Solenoid, there is a white plug going to it.
I disconnected this white plug and cleaned the rust off the terminal and plugged them back together again.
WOW, this has fixed the trouble.
Can be happy again !

 

[diyfarmer]

Most of the time when you hear clicking but no starting, it's usually poor connection or corrosion on a terminal.