Search results for query: *

Thanks Renze I will look for a wider set of outer rims, if too expensive I will cut and widen the narrow ones, I used to cut the 22.5 lorry rims, the front ones, cut one shoulder off each rim and weld the two rims together, really easy done because following the flange keeps everything straight...

There is more than me who have asked questions that were not answers in months, I did not go looking for unanswered questions but found them in my search for answers. I do not expect customer service, nor did I say I did, I sent in an error message report yesterday, I hope that helped, I also...

Can you put the hydraulic pump out of gear and see if the lever for the outer circuits will then release, may be stopping the engine will have the same effect, and with the engine stopped you could push a piece of round close fitting wood into one of the external couplers to release a small...

Hi, sorry to hear of your troubles, I have no answers for you, would be interested if you know this model of tractor gives much trouble, I was planning on looking at one shortly, and am a little concerned to hear your issues, I never came across a tractor lift that would not go down, usually...

Not good, looks like this forum is dead. Regards to all, J

Anyone got any information, or comments regarding a 3320, are they not at all popular. Thanks, J

I know its late, may be you have this problem sorted, if so could you post the answer, if not have a look at the video in this post. Hi, this may explain why you don't get a gear, he mentions all the wear points and what the results of wear will be. https://youtu.be/MXsRfbOiBhE May not...

Hi everyone Just wondering if the gears on a 1995 3320 are all synchro, or are they like some other Zetors where only 4 and 5 gears are synchromesh. Am going to look at this tractor and would also like to know if there are any particular issues I should look for. Regarding back wheels, it has...

Hi I know very little about these small Zetors, but yes, you should put a gauge on the hydraulic outlets and test for pressure, heaten up the hydraulic oil by doing some work with the tractor hydraulics and test again when warm, as you seem to have the problem when the oil gets hot. Someone will...

Thanks ricc From all I see online the 4611 is a four cylinder, 53hp, the 4011 seems very similar, with a four cylinder also 53hp, what am wondering now is what is the major difference between the 4011 and the 4611 given they have the same horse power, I think the 4011 was made first in 1962 to...

Hi Renze I did read what you said, and am still none the wiser as to whether the parts of the more modern lets say 7711 and such will fit, that's why I asked if the parts such as starter water pump injector pump and lift cover off such tractors would fit, and also whether the 4611 has the...

Hi, I do not know about these tractors, other than what I read, and it seems you can jam them in gear, and can select a forward gear even when still stuck in reverse, here are a few links that explains what other have done to release the gears, it seems the selectors need to be moved thus...

Thanks Renze, so what parts off other models are the same as on the 4611, what about engine parts, is the engine in the 4611 the same as is used in the 5511 and other four cylinder zetors, or is it a one off design that no parts off the others will fit, such as starter water pump injector pump...

Thanks Renze and ricc. I am going to give this one a miss, it is a 4511 with a cab, which makes it a 4 cylinder 53 hp tractor. This link http://www.boards.ie/vbulletin/showthread.php?t=2056956089/4 shows the restoration of a 25, 35 and a 4611. I would not like to be looking for parts for these...

This link http://www.boards.ie/vbulletin/showthread.php?t=2056956089/4 shows the restoration of a 25, 35 and a 4611. The 4611 is a four cylinder with 53 hp. I would not like to be looking for parts for these at least here in Ireland.

Hi Am going to look at this tractor in the morning, https://www.donedeal.ie/tractors-for-sale/zetor-4611/14050123 so would appreciate your comments, it seems to be a rare model, seller says its a 4 cylinder, I can only find images on the web, but no specifications, anyone know if this has the...

Anyone have any experience of this model, the seller says the steering is loose, when asked what he meant he said probably ball joints, am not so sure there is not more to it, have not gone to see it yet as it is quite a bit away, hoping to hear if the steering on this model is similar to...

Hi I had five of these tractors through the years, and I had very good brakes on them all, yet they all came to me with bad brakes. It is easy to take off the brake cylinders at the rear of the tractor and ensure they are clean and the seal inside is good, some have an O Ring, some have a lip...

Hi everyone I see this 7011 advertised, https://www.donedeal.ie/adview/view/14022785 wondering what you all think of it based on the add. It certainly needs some tidying, It also comes with a back end loader and a fork. The owner told me it has no blows off the engine but needs the diesel to be...

Thanks Renze, I intend to have a look at one shortly, you never know what one will find when the cab door opens, lots of modders in Ireland. Regards, john