Search results for query: *

Gentelmen On 7245 do you have to stop and clutch before putting into 4wd or would it do damage to put it in without stopping as it seems to go into 4wd easier if you dont stop Similarly do you have to stop and clutch before taking out of 4wd? any advice welcome regards Robert

Dear all The front headlights on our 92 7245 are constantly filling up with water . Ive tried emtying them and cleaning them out and reassembling but after a few days they are half full of water again. Ive looked carefully at the lenses and there are no cracks so I cant figure where water is...

Thanks for the advise lads Renze Would you know where the magnetic filter is on 7245 as you have 5245 and would probably be similar and also if oil has to be removed before draining ? Regards Robert

Paddy Where is the magnetic filter located underneath the tractor? I must check our 7245 out as lift is bit slow when lifting heavy bales also Regards Robert Bradley

Paddy Weve had this problem with our 7245 which would have same 4wd front axle as yours. Driving along steering would suddenly veer to the right every few miles, very unnerving. It turned out to be wear in the kingpin in the centre of the 4wd axle which holds the axle onto the frame in the...

Mike Try Pavel Cach Zetor Marketing Manager Zetor pdc If you e-mail him the serial no he will give you the exact date of manufacture down to when your 6718 rolled off the production line .He was able to date our 7245 to 20/06/1989 His e-mail address is cach@zetorpdc.cz Regards Robert Bradley

DEAR ALL am finding it very hard to disingage 4wd on our 7245 . Will ingage no problem at all but when you pull up handle to disingage it wont lock up into place sometimes and then other times works ok. What is prpoer procedure before ingaging should hi-low gear lever on floor be in neutral or...